Skip to main content
Hotline +49 7251 9544-0

MU SERIEs

MU S

Manual Dovetail Routing Machine

Milling motor
Engine speed
Milling depth adjustment
Milling height adjustment
Stops
Extraction port
Table extension (Optional accessories)

Transportable and adaptable bench-top machine, to rout a single dovetail slot with each machine cycle for Hoffmann Keys size W-0 / 1 / 2 / 3.

Mode of operation

  • Set the stops to size and insert the workpiece.
  • The workpiece is clamped when the handle is pressed down. The milling unit moves to the set milling depth.
  • The finished part is released again when the handle is returned Complete.

MU 3

Skala mit Vergrößerungslupe
Linienlaser
Fräshöhen- und Hebelwegbegrenzer
Motorfeineinstellung
Digitalanzeige Fräsposition Digitalanzeige Frästiefe
Klappanschlag Miniatur / Digitalanzeige für Klappanschläge
Tischverlängerung
Mittenanzeiger

Manual Dovetail Routing Machine

Transportable and adaptable bench-top machine, to rout a single dovetail slot with each machine cycle for Hoffmann Keys sizes W-0/-1/-2/-3 /-4.

Function

Position and secure the fence plate and lay the work-piece against it. By drawing down the hand lever, the workpiece is clamped and the motor starts. Continued pressure on the lever raises the router unit through the workpiece and to the pre-set routing depth. When the hand lever is returned to its original position, the motor switches off automatically and the routed work-piece is released.

On the model version MU 3-D the routing position, as well as the routing depth are digitally displayed to an accuracy of 1/10th mm.

pdfDownload Datasheet

Details / Possible Fences

  • Digital display
  • Fine motor adjustment
  • Laser line
  • Scale with magnifying lense
  • Fence plate
  • Butt stop fence
  • Internal fence
  • Angle fence plate elevation
  • Butt stop fence elevation
  • Internal fence elevation
  • Flip stop
  • Cornice fence
  • Adjustable internal fence
  • Adjustable fence "Synchro" 0-90°

MU 3 P

Pneumatic Dovetail Routing Machine

Transportable and adaptable bench-top machine, to rout a single dovetail slot with each machine cycle for Hoffmann Keys sizes W-0/-1/-2/-3 /-4.

Function

Position and secure the fence plate and lay the work-piece against it. By actuating the foot pedal, the work-piece is pneumatically clamped and the motor starts. The router unit rises through the work-piece and to the pre-set routing depth. When the routing depth is reached the unit returns to its home position and switches off. The routed workpiece is then released.

On the model version MU 3-PD the routing position, as well as the routing depth are digitally displayed to an accuracy of 1/10th mm.

pdfDownload Datasheet

  • Material support extension accessory
  • Digital display
  • Fence plate
  • Extraction port
  • Fine motor adjustment

MU 3 H

Horizontal, Manual Dovetail Routing Machine

Portable and flexible bench-top machine to router a single horizontal dovetail slot per machine cycle. Dovetail key sizes W-1/2/3/4.

Function

The work-piece is positioned against the centre-fence and the routing length (left & right) is set. By pressing the pneumatic footpedal the work-piece is clamped. The motor is switched on manually and the motor unit is drawn to the set router length. When the part is routered the unit is brought to the middle position, motor switched off and the workpiece is removed after releasing the footpedal.

pdfDownload Datasheet

  • Table view

MF 4

Hand Router Unit

Portable Dovetail Routing unit for the production of dovetail slots in the size W-4. E.g. post and beam construction cross joints or similar applications. Quickly produced in the work-shop or for on-site measured pieces.

Function

The routing position is marked on the work-piece. The MF-4 unit is positioned on the work-piece and secured with screws or G-clamps. The unit then routers manually to the router depth stop. For high precision routing also in the horizontal position.

pdfDownload Datasheet

  • Work-piece positioning pointer

X-Line 20

Manual dovetail routing machine

Manual bench-top model fitted with 530 W motor supplied with 45 ° angle fence and butt stop as standard. Most original Hoffmann accessories can be used with this machine. Twin spindle version available on request.

Function

By operating the hand lever, the work-piece is clamped. Continued pressure raises the router unit to a predetermined depth. Releasing the pressure returns the router to its home position, the motor switches off and the work-piece clamping is released. Position of the fencing is made manually.

pdfDownload Datasheet


eXess

Hand Routing Unit

The mobile solution for on the go

Flexible hand routing unit to produce dovetail slots in sizes W-1/2/3. Entry level model without compromising quality or performance

Function

Routing operation by choice

  • fixed (secured to the workbench)
    The work-piece is positioned and held on the fence. The router unit is raised manually through the work-piece.
  • by Hand
    The hand unit is placed on the work-piece and secured. The router unit is then pushed down through the material.

Including router and tool-kit. Available in dedicated tool-box.

pdfDownload Datasheet


Webdesign: a2dms