MX SERIES
MX 1
Double-Mitre-Saw
Double mitre saw for processing each end of the work-piece profile simultaneously up to 140mm wide. The machine is equipped with a hydro-pneumatic saw feed. The right-hand unit is adjustable to achieve a cutting length up to 3000mm (greater lengths optional). Both units rotated from 0° - 45°. The machine cycle is started by dual hand control.
The minimum possible cut length when processing both ends simultaneously is 520mm. When processing shorter lengths, a “Short- cut attachment” is available as an optional extra. This device is positioned between the operating units and each end (left and right) of the work-piece is processed in sequence.
The length of the work-piece is determined by positioning the adjustable unit with the aid of a digital reader.
Optional variations
- To work with pre-cut length material.
- To work from bar length material
MX 2
Combined Double Mitre Saw and Routing Machine
Precise miter cuts, to final size at each end of the work-piece plus double-sided routing of keyways in the faces of one or both sides in a common set-up. For work-piece widths to 140 mm, saw unit can be moved up to 3000 mm cutting length. Dimensional control by visual scale tape or optionally by digital measurement system. Pneumatic saw feed and pneumatic work-piece clamping. Saw and router units on adjustable carriage between +67°/-0°/-45°.
For W-1/-2/-3 Hoffmann Key sizes. Application on doors, cladding, frames and moldings in interior design and furniture.
MX 3
Combined Double Mitre Saw and Dowel Drilling Machine
Precise miter cuts, to final size at each end of the work-piece plus double-sided drilling for dowels in the faces of one or both sides in a common set-up. For work-piece widths to 140 mm, saw unit can be moved up to 3000 mm cutting length. Dimensional control by visual scale tape or optionally by digital measurement system. Pneumatic saw feed and pneumatic work-piece clamping. Saw and router units on adjustable carriage between +67°/-0°/-45°.
For 6/8/10 mm dowel. Application on doors, cladding, frames and moldings in interior design and furniture.
MX 5
Combined NC- Controlled Double Mitre Saw Equipped with Routers and Drills
User friendly control panel
All working cycles are freely programmable. The cut length can be entered or retrieved from memory on the 10.4” touch screen panel. USB interface for direct input of the working lists into the machine for example by production schedulers. Variable-free placement of the dovetail slots and drilling positions over the entire cross-section of a work-piece horizontally or vertically or combined. EG. 3 x dovetail slots and 2 x dowel holes.
For Hoffmann Key sizes W-1/2/3/4 and dowel sizes 8 mm. Working capacity for cross-sections X direction max 210 mm and in Z direction max 140 mm.
Hoffmann GmbH Maschinenbau
Phone +49 7251 9544-0 | Fax +49 7251 9544-44
This email address is being protected from spambots. You need JavaScript enabled to view it.
Webdesign: a2dms