MX 3
Combined Double Mitre Saw and Dowel Drilling Machine
Precise miter cuts, to final size at each end of the work-piece plus double-sided drilling for dowels in the faces of one or both sides in a common set-up. For work-piece widths to 140 mm, saw unit can be moved up to 3000 mm cutting length. Dimensional control by visual scale tape or optionally by digital measurement system. Pneumatic saw feed and pneumatic work-piece clamping. Saw and router units on adjustable carriage between +67°/-0°/-45°.
For 6/8/10 mm dowel. Application on doors, cladding, frames and moldings in interior design and furniture.
Variation VARIO 3:
1. For precut work-pieces
2. For bar length material..
- Technical data MX 3
- Cutting diagram MX 3
- Drilling unit MX 3
| Electrical connection |
3ph/N/PE 230/400 V 50/60Hz 6.6 kW |
| Pneumatic connection | 6 bar |
| Motor Saw/Router |
2 x 2200 W / 4 x 1050 W |
| Motor Speed Saw/Router |
3000 1/min. / 10000 1/min. |
| Saw blades | 330 x 30 x 3,2 |
| Control / Clamping |
SPS / pneumatic |
| Cutting capacity |
see diagramme |
| Routing depth |
75 mm |
| Drill depth |
30 mm (6/8/10 mm) |
| Dimensions W / D / H | 3540/1000/1520 mm |
| Weight | 480 kg |
| Order.Nr. | W 100 0600 |
