MS 35-SF

Saw and Routing Machine

Two clean precision mitre cuts to an exact length in one machine cycle. When both pieces are to be joined together or in a frame, then they can be prepared with one or two dovetail slots in precise positions in the cut faces for jointing with Hoffmann Keys. Suitable for work-piece sizes maximum 90 x 90 mm. Hoffmann Key sizes W-1/2/3. Ideal for cutting profiles for glazing beads, cornices, plinths etc. in wood, aluminium or plastic at 45°. It can also be used solely as a Double Mitre Saw, to cut to length profiles such as glazing beads, cornices plinths etc. in wood, aluminium, and plastic. At 45° angles.

Function

> The work-piece is laid on the table and positioned for cutting.

> The start button is pressed to begin the machine cycle and the profile is clamped.

> Both saw units cycle from above to make the mitre cuts.

> The parts remain clamped whilst the tables open to allow the router units to rout one or two dovetail slots.

> The machine tables close and the finished work-piece is removed.

> The profile is fed through the machine till the cut face is against the digitally positioned fence stop. The next machine cycle begins.

The measurement of the profile length is determined by manual positioning of the fence stop and reading the  digital display. The sequence of the router units follows automatically.

• Technical data MS 35-SF
• Saw station
• Saw station MS 35-SF
• Router positioning MS 35-SF
• Operating elements MS 35-SF

Electricalsupply	3ph / N/PE 230/400 V 50/60 Hz 5,4 kW
Pneumatic	6 bar
Motor	Saw motor 2x 2,2 kW / Spindle 30 mm
	Router motor 2 x 0,5 kW / Collet 6 mm
Motor Speed	Saw motor 3000 1/min.
	Router motor 24000 1/min.
Control / Clamping	SPS / pneumatic
material size	W 90 mm x H 90 mm
T/C tipped saw blade	Ø 350 mm x 30 mm
Router depth	0-70 mm
Extraction ports	2 x Ø 120 mm
Hoffmann Key sizes	W-1 / 2 / 3
Dimensions W / D / H	1470/950/1620 mm
Weight	680 kg
Order.Nr.	W 107 0000

• 8 zu- und abschaltbare Spannzylinder
• Sägeblätter HM Ø 350 x 30 mm
• Längsanschlag (Digitales Messsystem)
• Ablage
• Zweihandsteuerung
• NOT-Aus
• High-speed Winkelfräsmotoren
• Hoffmann-Fräswerkzeug
• Absaugschacht

• 1. Aluminium table with T-nut
• Drive belt
• Solid steel shaft assembly
• Dust extraction
• Chip breaker

• Routing positions I&II left and right

• Router motors
• Clamping rubber pads(Gummi)
• Fence stop
• Control panel